profile
viewpoint
Alan Johnson acjay @arenadotio Central Jersey http://acjay.com

acjay/akka 0

Akka Project

acjay/akka-persistence-inmemory 0

Asynchronously writes journal and snapshot entries to an in-memory store so that Akka Actors can recover state, useful for testing

acjay/akka-websocket-chat 0

Instructional demo of a real-world project using Akka-HTTP's web sockets

acjay/aphrodite 0

It's inline styles, but they work!

acjay/artsy-backbone-mixins 0

A library of Backbone mixins that DRY up some common domain logic and Artsy API rabbit holes.

acjay/artsy.github.io 0

The Artsy Engineering Open-Source Developers Blog

acjay/atomic-store 0

Atomic event store for Scala/Akka

acjay/backbone.hammer 0

Hammerjs events for Backbone

issue commentmvp/uhubctl

successful(?) usage with Rosewill hub

It says RHUB-210 in the item description on that page, despite the fact that the option selector does indeed say RHB-210. Searching for either term calls up results with both variants, probably due to similar mislabeling and aggregation.

I just think a tiny note similar to the D-Link DUB-H4 would be helpful. I'd be happy to suggest an edit as a PR, but it sounds like you don't agree that this would be helpful.

durka

comment created time in 21 hours

issue commentmvp/uhubctl

successful(?) usage with Rosewill hub

I see that now, but the thing is, the model number is exactly the same. I guess this is just my fault, but I didn't notice or think to pay much mind to the USB version column, under the assumption that a major change in the device would lead to a different model number. My point is that in a case like this, making it a little more clear which variants within the model are known to work vs not work could help other folks.

durka

comment created time in 4 days

issue commentmvp/uhubctl

successful(?) usage with Rosewill hub

I'm not seeing any success with the USB 3.0 version of the hub. Although it advertises per-power switching and appears to be turning off voltage, a USB light I have plugged in isn't going off. I tried with -r 1000. Below is the output after running uhubctl

Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0610 4-port hub
  bcdDevice           92.26
  iManufacturer           1 GenesysLogic
  iProduct                2 USB2.0 Hub
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      1 Single TT
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      2 TT per port
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x00e9
    Per-port power switching
    Per-port overcurrent protection
    TT think time 32 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent    100 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0103 power enable connect
   Port 2: 0000.0000
   Port 3: 0000.0000
   Port 4: 0000.0000

With uhubctl -a on I get

 Hub Port Status:
   Port 1: 0000.0103 power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power

I'll make a PR to add this note to the README. I bought this hub specifically thinking it would work with uhubctl :(

durka

comment created time in 4 days

issue commentgraphql/graphql-spec

Query all fields of a type in a simple expression [wildcard]

@ericvergnaud -- respectfully, go ahead and make a PR for the version of this that you think should exist. Perhaps you have an approach that differs from ones that have been considered, and people may find that compelling.

Unsubscribing, as 5 years has been long enough to follow this.

AhmadAudeh

comment created time in 7 days

issue commentmdoyleaz/Logitech-G560-LED-Controller

Would this work with Raspberry Pi Zero W?

It works fine. It was a little tricky getting the dependencies installed. I think I had to sudo pip3 install pyusb rpyc, and then after that, I was able to do sudo python3 g560_service.py. I've just been instantiating LedControls from the REPL to play with it, but it works fine.

The one quirk I'm noticing is that the brightness still responds to the audio level in ways that aren't super clear to me. Occasionally, the brightness will dim somewhat, and then an audio notification or playback of music will cause the brightness to increase again. Not sure if there's a way to turn this off, and otherwise control the brightness level independently of color.

acjay

comment created time in 10 days

issue openedmdoyleaz/Logitech-G560-LED-Controller

Would this work with Raspberry Pi Zero W?

Sorry to open this as an issue, but is there any reason this wouldn't work on a Raspberry Pi Zero W?

created time in 24 days

issue openedpowertab/powertabeditor

Stop button not working

On v2.0.0-alpha11, Window 10 build, the stop button isn't working for me. It causes playback to restart, instead of stopping.

created time in a month

issue commentpowertab/powertabeditor

Playback is too slow

I think it's affecting all slides, as far as I can tell

Malethar

comment created time in a month

issue commentpowertab/powertabeditor

Playback is too slow

I think there are still playback issues with slides, specifically. Things seem fine for bends, but slides cause the tempo to slow down for the duration of the slide. I'm experiencing this on Windows 10.

Malethar

comment created time in a month

issue commentpowertab/powertabeditor

Error initializing MIDI output device

Same problem with Alpha 11 on Windows 10. I uninstalled and installed Alpha 10 and playback works fine.

francheton

comment created time in a month

more