profile
viewpoint
Liam Lacey liamlacey Bristol, UK

Ableton/LinkKit 84

iOS SDK for Ableton Link, a new technology that synchronizes musical beat, tempo, and phase across multiple applications running on one or more devices.

liamlacey/Vintage-Toy-Synthesiser 13

My project for the Element14 Music Tech Design Challenge

liamlacey/Shuttertone 12

A generative music application that uses colour data from image to create sequences of music.

liamlacey/Turnado-Hardware-MIDI-Controller 8

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin

liamlacey/JUCE-Translation-File-Generator 3

A simple GUI application for generating suitable translation files for use with the JUCE Library and its LocalisedStrings class.

liamlacey/MidiControllerApplication 0

A simple macOS application that contains sliders and buttons for sending MIDI data

liamlacey/tic-tac-toe 0

An example of Tic-Tac-Toe written in C++ both as a command line application and a GUI application.

issue closedolikraus/u8g2

Support for SSD1315Z with charge pump

Hi,

I'm attempting to use u8g2 with a 128x64 OLED using the SSD1315Z driver IC and which uses a built-in charge pump. I've read that the SSD1315 is compatible with the SSD1306, however I've tried using the 1306 device constructors but with no luck.

Looking at the datasheet I have, part of the "power on sequence with charge pump" is as follows:

  1. After VDD become stable, wait at least 20ms (t0), set RES# pin LOW (logic low) for at least 3us (t1)(3)and then HIGH (logic high).
  2. After set RES# pin LOW (logic low), wait for at least 3us(t2). Then input commands with below sequence: a. 8Dh for enabling internal charge pump b. AFh for display ON

Is there currently a device constructor that does this specific reset pin toggling followed by these specific input commands? If not, where and how in the code can I attempt to modify an existing device constructor to do this?

Many thanks.

closed time in 2 days

liamlacey

issue openedolikraus/u8g2

Support for SSD1315Z with charge pump

Hi,

I'm attempting to use u8g2 with a 128x64 OLED using the SSD1315Z driver IC and which uses a built-in charge pump. I've read that the SSD1315 is compatible with the SSD1306, however I've tried using the 1306 device constructors but with no luck.

Looking at the datasheet I have, part of the "power on sequence with charge pump" is as follows:

  1. After VDD become stable, wait at least 20ms (t0), set RES# pin LOW (logic low) for at least 3us (t1)(3)and then HIGH (logic high).
  2. After set RES# pin LOW (logic low), wait for at least 3us(t2). Then input commands with below sequence: a. 8Dh for enabling internal charge pump b. AFh for display ON

Is there currently a device constructor that does this specific reset pin toggling followed by these specific input commands? If not, where and how in the code can I attempt to modify an existing device constructor to do this?

Many thanks.

created time in 2 days

startedbancika/diy-layout-creator

started time in 9 days

startedstpope/CSL6

started time in 2 months

startedjuce-framework/JUCE

started time in 2 months

startedenzienaudio/hvcc

started time in 3 months

more