profile
viewpoint
If you are wondering where the data of this site comes from, please visit https://api.github.com/users/arrmo/events. GitMemory does not store any data, but only uses NGINX to cache data for a period of time. The idea behind GitMemory is simply to give users a better reading experience.

tagyoureit/nodejs-poolController 150

An application to control pool equipment from various manufacturers.

tagyoureit/nodejs-Pentair 13

An application to read/write to Pentair pool controllers.

arrmo/comchap 0

Commercial detection script to add chapters into video file

arrmo/Comskip 0

A free commercial detector

arrmo/dnsperftest 0

DNS Performance test

arrmo/librenms 0

Community-based GPL-licensed network monitoring system

arrmo/librenms-agent 0

LibreNMS Agent & Scripts

arrmo/luci 0

LuCI - OpenWrt Configuration Interface

arrmo/nodejs-Pentair 0

An application to read/write to Pentair pool controllers.

arrmo/nodejs-poolController 0

An application to control pool equipment from various manufacturers.

push eventarrmo/openwrt

Daniel Golle

commit sha cf40141b515d518ff166afb85e898904ab2ae57a

kernel: properly handle paging errors in fit partition parser The uImage.FIT partition uses page mapping without properly handling paging errors. This can lead to Kernel Oops in case of read errors while trying to parse uImage.FIT partitions. Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

David Bauer

commit sha 99786e121bf3ad049ab261c78b1ca8f022a1089f

hostapd: refresh patches Signed-off-by: David Bauer <mail@david-bauer.net>

view details

David Bauer

commit sha 7073e88a767390c77b5fe426c2080dd392a4e932

hostapd: fix Proxy-ARP with Hotspot 2.0 disabled The disable_dgaf config fiels is only available in case Hostapd is compiled with Hotspot 2.0 support, however Proxy-ARP does not depend on Hotspot 2.0. Only add the code related to this config field when Hotspot 2.0 is enabled to fix compilation with the aformentioned preconditions. Signed-off-by: David Bauer <mail@david-bauer.net>

view details

David Bauer

commit sha ec2078e3efe645b7fd7d85b1b918b4fbe2b8f809

hostapd: enable proxy-arp support for hostapd-full The hostapd.sh script already has support for configuring proxy-ARP, however no built variant has support for it enabled. Enable proxy-ARP support for hostapd-full builds in order to allow users to actually use this feature. Signed-off-by: David Bauer <mail@david-bauer.net>

view details

David Bauer

commit sha 161ee85bbe6d27166cee87be0c02a48384e818bf

ramips: fix input type for TL-MR3020 v3 The modec{1,2} keys are actually switches. Add the respective DTS properties to avoid accidental activation of failsafe mode. Signed-off-by: David Bauer <mail@david-bauer.net>

view details

David Bauer

commit sha db3545cd027935b305ee00e38fc363baa050e29e

ramips: increase SPI frequency for TL-MR3020 v3 The GigaDevices GD25Q64B supports higher SPI clocks than 10 MHz. While 100 MHz do not work reliably, 50 MHz works without issues. Signed-off-by: David Bauer <mail@david-bauer.net>

view details

David Bauer

commit sha 9c965893ed8065df4c5ac0ba730968d215e5dc91

ramips: enable fast-read for TL-MR3020 v3 The GigaDevices GD25Q64B found on the TL-MR3020 v3 supports the fast read instruction. Add the required DT property in order to enable usage of this property. Signed-off-by: David Bauer <mail@david-bauer.net>

view details

David Bauer

commit sha 90e167abaae80a59c8780d3305f8e1260d9f1339

ramips: add label-mac for TL-MR3020 v3 The TP-Link TL-MR3020 v3 only has a single MAC address assigned for ethernet LAN as well as WiFi. This MAC address is also printed on the casing. Signed-off-by: David Bauer <mail@david-bauer.net>

view details

Sebastian Schaper

commit sha 1c8214d6f2c70db40dad0d111954802668b174d4

ath79: fix spelling of DEVICE_MODEL for D-Link DAP-2695 Change `DAP-2965` to `DAP-2695` for device selection in menuconfig. Fixes: cd09f26660b6 ("ath79: add support for D-Link DAP-2695-A1") Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> [add Fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

John Audia

commit sha 6b1cd3e3451ab1057dd3b27fd3f9834e1765d20c

kernel: bump 5.10 to 5.10.61 Manually rebased: bcm27xx/patches-5.10/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch Removed upstreamed: mvebu/patches-5.10/101-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>

view details

John Audia

commit sha be7e0091feb32f579818825a36e28bfe3acdf930

kernel: bump 5.4 to 5.4.143 Manually rebased: bcm27xx/patches-5.4/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch Removed upstreamed: mvebu/patches-5.4/100-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>

view details

Ansuel Smith

commit sha b8f8d0651c9ec2a6f4a869fc262d2ba38d723b1f

kernel: fix warning about unused try_to_force_load There is a longlasting warn about unused defined try_to_force_load. Fix this by including this function only when actually used. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

view details

Rui Salvaterra

commit sha 7e135add24911a9302d9e73fe0456318ce8169fa

kernel: disable CONFIG_RCU_EXPERT and friends Based on the existing documentation [1][2], I dare anyone to demonstrate that we need to fine-tune these RCU parameters. The (performance) breakage potential for doing so is immense, so let's just please put down this loaded footgun. Disable CONFIG_RCU_EXPERT and its dependent symbols. Additionally, remove the CONFIG_RCU_EXPERT symbol from the target kconfigs which contain it. [1] https://www.kernel.org/doc/Documentation/RCU/Design/Data-Structures/Data-Structures.html [2] https://lwn.net/Articles/777214/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

Rui Salvaterra

commit sha 505b7a2d08a79780f50a2adb383f57ef63bd85ac

kernel: move two symbols to the generic kconfigs CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them to the generic kconfigs. And resort the generic kconfigs while at it. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

Rafał Miłecki

commit sha bce00f47e5d67e5a33e9d7fa137cbe0a5d3d334b

bcm53xx: backport the latest upstream DT changes This includes: 1. BCM5301X changes from 5.14 and queued 5.15 stuff 2. NSP changes from 5.11 - 5.15 for kernel 5.10 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

view details

Adrian Schmutzler

commit sha d37125b3f3909c26c1e4648411a5fa5d956df6d0

ath79: remove redundant BLOCKSIZE of 64k from devices BLOCKSIZE = 64k is set in Device/Default, i.e. global default on the target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Filip Matijević

commit sha e2b03c16eb44a10fa64f0a58325bc494ee1b8bcb

ipq806x: add missing enclosing partitions block for TP-Link C2600 The partitions that have compatible property set are skipped by mtd if they are not contained inside a partitions node and this breaks fetching MAC address from "default-mac" partition. Fix this by defining all the partitions inside partitions node with compatible = "fixed-partitions" as nvmem requires the standard partitions scheme to work correctly. Fixes: FS#3945 Fixes: cd36d71655ee ("ipq806x/dts: Add Archer C2600 DTS") Fixes: 0458a8993ca1 ("ipq806x: convert mtd-mac-address to nvmem implementation") Signed-off-by: Filip Matijević <filip.matijevic.pz@gmail.com> Reviewed-by: Ansuel Smith <ansuelsmth@gmail.com> [adjust commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Adrian Schmutzler

commit sha aec97b31ea38820403eb0e20f97ff8e544efe4e2

ramips: provide default BLOCKSIZE for Device/seama The Device/seama shared definition requires BLOCKSIZE, so it should have a default value for this variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Sungbo Eo

commit sha f08b76b32fded7ff3ba0453d45216e19146b7bc5

ramips: w2914ns-v2: consolidate leds nodes into dtsi w2914ns-v2, 11acnas, and freezio use almost same board and thus share a common dtsi file. Now that LED labels do not contain "devicename" since commit c846dd91f0a6 ("ramips: remove model name from LED labels"), let's move the leds nodes to dtsi and remove them from dts. Note that freezio has only one USB 3.0 port and adding &ehci_port2 trigger does not incur any visible changes. Signed-off-by: Sungbo Eo <mans0n@gorani.run>

view details

Rafał Miłecki

commit sha 8a4d4d4243357b28722e3327e2c7c7b4ceb288ec

bcm53xx: backport missed DT patch cleaning up CRU block Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

view details

push time in 15 days

create barncharrmo/openwrt

branch : openwrt-21.02

created branch time in 19 days

push eventarrmo/openwrt

Adrian Schmutzler

commit sha c4143505e0c0ef39a4254888397c801b5dab455c

ramips: mt7620: move Phicomm MAC address setup to DTSI The setup is the same for all devices, so move it up one level. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Shiji Yang

commit sha 80e70be0ab8461f2856ababa4b74fff9c9a331ed

ramips: add new flash layout support to Phicomm K2 Descriptions: Phicomm K2 (PSG1218) got a new "permanent_config" partition after update firmware to v22.5. This partition located in front of the firmware partition, same as The Phicomm K2P and K2G. Due to this change the new bootloader can't load previous firmware any more. This commit is aimed at add support for Phicomm K2 which official firmware version is 22.5.x or newer. For which runs old firmware version, just update OpenWrt that has a prefix of "k2-v22.4". For uniform naming, this commit also changed the model name PSG1218 to a more recognizable name K2, refer to Phicomm K2G, K2P K2T. OpenWrt selection table: official firmware version OpenWrt v22.4.x.x or older phicomm_k2-v22.4 v22.5.x.x or newer phicomm_k2-v22.5 Installation: Same as Phicomm K2G, K2P, PSG1208. a. TFTP + U-Boot b. Open telnet by some web page vulnerability (Search Baidu by key words "K2 telnet"), and then we can upload firmware image to /tmp and write it to firmware partition with mtd instruction. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [rebase, add/harmonize version in model variables, fix version typo in commit message, wrap commit message properly] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Chukun Pan

commit sha fcc075e12f6f4718ccac6b5eb68cb8346064ee43

ipq806x: Askey RT4230W REV6: fix caldata script The partition name in the device dts is '0:ART'. Be independent to prevent this part from becoming incorrect once the kernel v5.4 gone. Fixes: da8428d277cd ("ipq806x: add support for Askey RT4230W REV6") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

view details

Shiji Yang

commit sha 09143282bde3abd560a3b70f76df6d77b6ac6f12

ramips: add support for Motorola MWR03 Specifications: * SOC: MT7628AN + MT7612E * ROM: 8 MiB Flash * RAM: 64 MiB DDR2 * WAN: 10/100M *1 * LAN: 10/100M *3 * Button: Reset *1 * LEDs: orange *1, white *1 * Antennas: 2.4 GHz *2 + 5 GHz *2 * TTL Baudrate: 57600 * TFTP Upgrade: IP: 192.168.51.1, Server: 192.168.51.100 MAC addresses as verified by OEM firmware: use address source 2g *:d8 factory 0x0004 (label) 5g *:d9 factory 0x8004 LAN *:d7 factory $label -1 WAN *:da factory $label +2 Installation (TFTP + U-Boot): * Connect device with a TTL cable and open a serial session by PuTTY. * Press "2" when booting to select "Load system code then write to Flash via TFTP". * Configure the IP of local host server. * Upload firmware by tftpd64, it will boot when write instruction is executed. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [fix DTS line endings, fix label MAC address, adjust status LED names, convert mtd-mac-address-increment to mac-address-increment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Shiji Yang

commit sha a73a8269e13f9387a2ac883dac7fe0dd49999ede

ramips: add support for DomyWifi DM202/DM203/DW22D Specifications: * SOC: MT7620A + MT7610E * ROM: 16 MiB spi flash (W25Q128FVSG) * RAM: 128 MiB DDR2 (W971GG6KB-25) * WAN: 10/100M *1 * LAN: 10/100M *4 * USB: Type-A USB2.0 *1 * SD: MicroSD *1 * Button: Reset *1 * Antennas: 2.4 GHz *2 + 5 GHz *1 * TTL Baudrate: 57600 * U-Boot Recovery: IP: 10.10.10.123, Server: 10.10.10.3 Installation: * Web UI Update 1. Open http://192.168.10.1/upgrade.html in the browser. 2. Rename firmware to a short name like firmware.bin and then upload it. 3. Fill in the password column with the following content: password | mtd -x mIp2osnRG3qZGdIlQPh1 -r write /tmp/firmware.bin firmware * TFTP + U-Boot 1. Connect device with a TTL cable. 2. Press "2" when booting to select "Load system code then write to Flash via TFTP". 3. Upload firmware by tftpd64, it will boot when write instruction is executed. Signed-off-by: Shiji Yang <yangshiji66@qq.com>

view details

Chukun Pan

commit sha 269758a5bcea1376d037dfea62f161ff8562e489

ipq806x: Askey RT4230W REV6: use usual writing for pcie part The problem has been fixed in f47cb405cafd ("ipq806x: fix pci broken on bootm command"), now the pcie part can be written in the usual way. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Ansuel Smith <ansuelsmth@gmail.com>

view details

Romain Mahoux

commit sha e2d08084c30e1f25559bfc1c745c0d0854a75636

ath79: add support for Compex WPJ558 (16M) Specifications: - SoC: QCA9558 - DRAM: 128MB DDR2 - Flash: 16MB SPI-NOR - Wireless: on-board abgn 2×2 2.4GHz radio - Ethernet: 2x 10/100/1000 Mbps (1x 802.11af PoE) - miniPCIe slot Flash instruction: - From u-boot tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj558-16m-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize boot - From cpximg loader The cpximg loader can be started either by holding the reset button during power up. Once it's running, a TFTP-server under 192.168.1.1 will accept the image appropriate for the board revision that is etched on the board. For example, if the board is labelled '6A07': tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj558-16m-squashfs-cpximg-6a07.bin Signed-off-by: Romain Mahoux <romain@mahoux.fr> [convert to nvmem, remove redundant lan_mac in 02_network] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Giovanni Cascione

commit sha d57ba86e489e363be3b26b9cb880048da5dfd12c

ramips: add support for D-Link DAP-1325-A1 This patch adds support for D-Link DAP-1325-A1 (Range Extender Wi-Fi N300) Specifications: - SoC: 580Mhz MT7628NN - RAM: 64MB, DDR2 SDRAM - Storage: 8MB, SPI (W25Q64JVSSIQ) - Ethernet: 1x 10/100 LAN port - WIFI: 2.4 GHz 802.11bgn - LED: Status (2x to provide 3 colors), Wi-Fi Signal Strength (4x) - Buttons: Reset, WPS - UART: Serial console (57600, 8n1) Row of 4 holes near LAN port, starting from square hole: 3.3V, TX,RX,GND - FCC ID: fccid.io/KA2AP1325A1/ Installation: Failsafe UI Firmware can be uploaded with Failsafe UI web page: - turn device off - press and hold reset button - turn device on - keep holding reset until red wifi strength led turns on (ab. 10sec) - connect to device through LAN port PC must be configured with static ip (192.168.0.x) - connect to 192.168.0.50 - select image to be flashed and upload. Device will reboot after successful update Serial port/TFTP server - Connect through serial connectors on PCB (e.g. with teraterm) - Set up a TFTP server, and connect through LAN with static IP - Put image file in the root of the server - Boot the device and select '2' at U-Boot startup - Set device IP, server IP and image file name - Start upload and flash Signed-off-by: Giovanni Cascione <ing.cascione@gmail.com> [fix whitespaces in DTS, convert to nvmem, add mtd-eeprom] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

David Yang

commit sha a6c410ae10ea51f5541fe2fdc3bd39011bff3f0e

ramips: increase flash freq for miwifi-mini The flash is Winbond 25Q128. As it has large rom, better to increase flash frequency to 70MHz according to the flash spec and enable fast-read. Signed-off-by: David Yang <mmyangfl@gmail.com>

view details

David Yang

commit sha 5ed11012e7d990a11256917a5112f528cb983c89

ramips: lock u-boot partition and unlock u-boot-env for miwifi-mini Generally u-boot should keep read-only to avoid mis-overwriting and bricking the device, but u-boot-env could be safely modified with u-boot setenv tool. Signed-off-by: David Yang <mmyangfl@gmail.com>

view details

David Yang

commit sha 38cb5005166dd49fb3d69ba68a905b97cc23f6a3

ramips: expose ephy leds for miwifi-mini Give users more control by exposing ephy leds. Signed-off-by: David Yang <mmyangfl@gmail.com> [remove execute bit on 01_leds, add status for gpio2] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Álvaro Fernández Rojas

commit sha 4ab0b5fabd2e98264fbefb48da19fcc7b56a854a

bmips: backport accepted watchdog patch This patch has been accepted for linux v5.14. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

view details

Daniel Golle

commit sha 364bd887a148a1963bf9a94fe7dd171f36afb87e

fstools: update to git HEAD 50e6b20 libfstools: handle open() return value properly in F2FS check e1b6811 blockd: include missing libubox/utils.h Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Felix Fietkau

commit sha 3ebbf795df2633bbd277a5ec8651d4b093a775a2

ustp: add OpenWrt STP/RSTP daemon This integrates with netifd in order to provide STP/RSTP protocol support in user space. It defaults to using RSTP for bridges with stp enabled. This daemon has no config files, it uses the configuration passed from netifd via ubus Signed-off-by: Felix Fietkau <nbd@nbd.name>

view details

Jan-Niklas Burfeind

commit sha d98738b5c118fc45068b45f07b8b6938e91f35d2

ath79: add support for onion omega The Onion Omega is a hardware development platform with built-in WiFi. https://onioniot.github.io/wiki/ Specifications: - QCA9331 @ 400 MHz (MIPS 24Kc Big-Endian Processor) - 64MB of DDR2 RAM running at 400 MHz - 16MB of on-board flash storage - Support for USB 2.0 - Support for Ethernet at 100 Mbps - 802.11b/g/n WiFi at 150 Mbps - 18 digital GPIOs - A single Serial UART - Support for SPI - Support for I2S Flash instructions: The device is running OpenWrt upon release using the ar71xx target. Both a sysupgrade and uploading the factory image using u-boots web-UI do work fine. Depending on the ssh client, it might be necessary to enable outdated KeyExchange methods e.g. in the clients ssh-config: Host 192.168.1.1 KexAlgorithms +diffie-hellman-group1-sha1 The stock credentials are: root onioneer For u-boots web-UI manually configure `192.168.1.2/24` on your computer, connect to `192.168.1.1`. MAC addresses as verified by OEM firmware: 2G phy0 label LAN eth0 label - 1 LAN is only available in combination with an optional expansion dock. Based on vendor acked commit: commit 5cd49bb067ca ("ar71xx: add support for Onion Omega") Partly reverts: commit fc553c7e4c8e ("ath79: drop unused/incomplete dts") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>

view details

Christian Lamparter

commit sha 2b0378cf9f3163bac29fa9946b3aa1607fc03802

gpio-button-hotplug: convert to gpio descriptor (gpiod_) API OpenWrt's special gpio-button-hotplug driver is still using exclusively the legacy GPIO Subsystem gpio_ API. While it still does work fine for most devices, upstream linux is starting to convert platform support like that of the APU2/3/4 to the new GPIOD LOOKUP tables that are not supported by it. Hence, this patch replaces the gpio_ calls present in gpio-button-hotplug with gpiod_ equivalent wherever it's possible. This allows the driver to use the gpiod lookup tables and still have a fallback for legacy platform data code that just sets button->gpio set to the real button/switch GPIO. As a bonus: the active_low logic is now being handled by the linux's gpio subsystem too. Another issue that was address is the of_handle leak in the dt parser error path. Tested with legacy platform data: x86_64: APU2, MX-100 Tested on OF: ATH79; MR18, APM821xx: Netgear WNDR4700, RAMIPS: WL-330N3G LANTIQ: AVM FritzBox 7360v1 Reported-by: Chris Blake <chrisrblake93@gmail.com> Tested-by: Chris Blake <chrisrblake93@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

view details

Christian Lamparter

commit sha a1bd8109f02e3d8ef66a2f79ab8078055d7cd0b1

ath79: remove obsolete pci-ath9k-fixup.[c,h] files This was old code from the AR71XXs target days that doesn't get compiled and used anymore. Bringing up AR92xx and earlier chips from their OWL-Emulator state is currently done by the upstream ath9k-pci-owl-loader module. (see the kmod-owl-loader package). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

view details

Christian Lamparter

commit sha d24efa92e1c0918526c6eae6c2f2e98ec1a8c048

ath9k: owl-loader: remove obsolete AR71XX patch this is no longer necessary as the AR71XX target was superseded by ath79. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

view details

Eneas U de Queiroz

commit sha 7119fd32d397567931e63dbbf72014e95624018f

openssl: bump to 1.1.1l This version fixes two vulnerabilities: - SM2 Decryption Buffer Overflow (CVE-2021-3711) Severity: High - Read buffer overruns processing ASN.1 strings (CVE-2021-3712) Severity: Medium Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>

view details

Weijie Gao

commit sha 050621aa017273086d46ccf22dfb6942a367e049

mediatek: add a new spi-nand driver for kernel 5.10 This patch adds a new spi-nand driver which implements the SNFI of mt7622 and mt7629. Unlike the existing snfi driver which makes use of the spi-mem framework and the spi-nand framework with modified ecc support, this driver is implemented directly on the mtd framework with other components untouched, and provides better performance, and behaves exactly the same as the nand framework. Signed-off-by: Weijie Gao <hackpascal@gmail.com>

view details

push time in 24 days

push eventarrmo/openwrt

Hauke Mehrtens

commit sha 7e757a09ec11d773203a53eaa5ddc8c2dc0b68c1

archs38: Do not activate ext3 driver options The ext3 driver was already removed, the kernel config options are only there for backwards compatibility. The eth4 driver takes care of ext3 file systems. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

view details

Hauke Mehrtens

commit sha 469719b4b14534776fb84d21aabb9199f73afb0a

layerscape: Do not activate ext2 and ext3 driver options The ext3 driver was already removed, the kernel config options are only there for backwards compatibility. The eth4 driver takes care of ext3 file systems. The ext4 driver also handled ext2 file systems. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

view details

Hauke Mehrtens

commit sha c18f91d11822c5ac7572c35bcfc3538349157042

kernel: Do not deactivate staging drivers Do not deactivate the kernel configuration symbol CONFIG_STAGING in the target configurations any more. This prevented the build of the exfat.ko for example. Fixes: FS#3979 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

view details

Daniel Golle

commit sha 7ca173d51a281681f85532fbd212e0c1b9d95806

uboot-mediatek: pass console=tty1 for BPi-R2 BananaPi BPi-R2 comes with HDMI and MIPI-DSI. Use dislpay facility in Linux by add "console=tty1" boot argument. Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Daniel Golle

commit sha 0d3f3323a2fc58598e4036a84624ad57586f6538

mediatek: mt7623: enable more hardware features In order to make HDMI console available on the BananaPi BPi-R2 select various Kconfig symbols which are useful for systems with graphics. Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Rosen Penev

commit sha beddcfdc30e734df52c588ef4862de45b1af7235

gdb: update to 10.2 Replace some OpenWrt patches with openembedded ones for easier maintainability. Remove several outdated ones as well. Replace PKG_RELEASE with AUTORELEASE to avoid manual bumps. Remove !arc dependency as it is supported upstream now. Signed-off-by: Rosen Penev <rosenp@gmail.com>

view details

Rui Salvaterra

commit sha 8408e0ff07003f1fd93c3bec47bb142eb06ace69

kernel: bump 5.10 to 5.10.60 No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

John Audia

commit sha 96369a68e737f05c00e1d76ec382b28d3a2d309b

kernel: bump 5.4 to 5.4.141 All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>

view details

John Audia

commit sha f25cebc43c18967671dfe53f9bc8bf26613b1143

kernel: bump 5.4 to 5.4.142 Removed upstreamed: hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>

view details

Fritz D. Ansel

commit sha 65ee14a11890f26679c6aea351513f59ab2470af

dropbear: allow to use with xinetd with xinetd allowed+blocked (ipv6) hosts could be set what is not possible with stock dropbear package The file size increased 12 Bytes, so this "opimisation" did not really helped. Within a compressed storage format it is 0.. ipk: 111.171 -> 111.361 = 190 bytes bin: 215.128 -> 215.140 = 12 bytes Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>

view details

Vincent Wiemann

commit sha c4a426746f2c6fde23abc52fcf980840d6374f4a

firmware-utils: add support for ZyXEL ZLD firmware This commit adds a tool for extracting and creating firmware archives for: - ZyXEL NWA5121-N - ZyXEL NWA5121-NI - ZyXEL NWA5123-NI - ZyXEL NWA5123-AC - ZyXEL NWA5301 - ZyXEL NWA3560N v2 - ZyXEL WAC6100 - ZyXEL WAC6500 And maybe others... Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>

view details

Jan Hoffmann

commit sha 9754b6ba6f32e634934d99cdd4129041f9297d1a

ltq-vdsl/ltq-vdsl-app: clean up configure args The userspace application now uses the model=full option to match the configuration of the kernel module. The source no longer contains SOAP support, which was the primary reason to build only typical instead of full before. This makes several CLI commands, which were already supported in the kernel module, available in the userspace application. For example, this includes bbsg which allows to get information about VDSL2 bands. Some previously applied build options were redundant. Disabling ADSL MIB support is unnecessary, as it only applies to Danube. ADSL LED support is no longer included in the source. ReTx counters are already included with model type full. This increases the size of the userspace application by approximately 15 kB (uncompressed). The kernel module does not change at all. Signed-off-by: Jan Hoffmann <jan@3e8.eu>

view details

Michael Siegenthaler

commit sha 4b4fa2f9fed7340dca12b4fcd8e36e0c8612b95d

ramips: fix ethernet MAC address on Omega2 According to https://docs.onion.io/omega2-docs/mac-address.html, 0x28 is the correct location to read the address on Onion Omega 2(+) devices. This fixes a regression introduced by commit 77e850fe76e3 ("ramips: tidy up MAC address setup for Linkit Smart and Omega2"), which was a cleanup that intended to preserve existing behavior. In my testing with v19.07.7, however, the MAC address determined from the device tree takes precedence over the one set by 02_network, so the aforementioned commit actually changed the behavior. Signed-off-by: Michael Siegenthaler <msiegen@google.com> [Adapt patch to nvmem usage] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

view details

Andre Heider

commit sha 60af8d753343691c4a647bfc7c51ef6eb92df9f2

prereq-build: require python3-distutils Debian and Ubuntu ship a python3-minimal package which does not include the distutils module. This is not supported by upstream and can be considered a broken python distribution. In practice, many scripts depend on said module, and this is a reoccuring pain point for building various OpenWrt packages. Require and check for said module, enough time has been wasted on this. A list of just the most recent issues: https://github.com/openwrt/packages/pull/16304 https://github.com/openwrt/packages/pull/16027 https://github.com/openwrt/packages/pull/15443 https://github.com/openwrt/packages/pull/14394 https://github.com/openwrt/packages/pull/12909 https://github.com/openwrt/packages/issues/12443 https://github.com/openwrt/packages/pull/11035 https://github.com/openwrt/packages/issues/10993 Signed-off-by: Andre Heider <a.heider@gmail.com>

view details

Daniel Golle

commit sha 4f1c5b01c11b43a8f3da7639d6a24a18efa1fea6

mediatek: mt7623: backport musb, improve HDMI console Backport support for dual-role USB 2.0 as that's what is actually built-into MT7623. Improve HDMI console by enabling VT and setting up tty1..tty6. Re-add accidentally removed CONFIG_ARM_ARCH_TIMER. Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Álvaro Fernández Rojas

commit sha a71a51c7ff21ba2c77be9f1b602e14bd88d0a25a

bcm27xx-userland: update to latest version Properly recognise all BCM2711 variants Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

view details

Álvaro Fernández Rojas

commit sha 8e4110d81e6c490cab52fc65d35f5b5c913ceb0b

bcm27xx-gpu-fw: update to latest version Multiple firmware fixes needed for kernel updates. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

view details

Álvaro Fernández Rojas

commit sha 41ceec8100116b9e2126606d01d118fa6fa5aed1

generic: add missing 5.10 config symbols These symbols are needed for bcm27xx 5.10 kernel support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

view details

Álvaro Fernández Rojas

commit sha 33b6885975ce376ff075362b7f0890326043111b

generic: fix debloat dma-buf 5.10 patch The current patch produces the following error when CONFIG_DMABUF_HEAPS is enabled: drivers/built-in.a: member drivers/dma-buf/heaps in archive is not an object Fixes: b10d6044599d ("kernel: add linux 5.10 support") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

view details

Álvaro Fernández Rojas

commit sha 8299d1f057439f94c6a4412e2e5c5082b82a30c9

bcm27xx: add kernel 5.10 support Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted patches, wireless patches and defconfig patches. bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 4B v1.1 4G bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

view details

push time in a month

pull request commentopenwrt/openwrt

kirkwood: expand internal storage for EA3500/EA4500 & external for all

Actually, thinking about this one, but ... does the larger kernel (partitioning change) need to be a new recipe (device)? Asking because it's sort of a two step process to get there => separate that out, to ease transitioning?

What I mean is ... change the partitioning, "old" and "new" device, but only allow the larger kernel in the "new" device, to make sure it's not done by accident.

Thoughts?

Thanks!

builker

comment created time in a month

pull request commentopenwrt/openwrt

ramips: sunvalley - allow larger sysupgrade

Dang it ... LOL. Thanks! I missed the first word in the commit, my bad. I tried to make them them same, but tripped over myself 😜.

Appreciate it!

arrmo

comment created time in a month

push eventarrmo/openwrt

Russell Morris

commit sha 21476f011841cf02e50419a7c766cd12a593b45b

ramips: sunvalley - allow larger sysupgrade Aligned to size of mtd-concat partition (firmware) - in this device we have mtd-concat driver that joins multiple flash partitions - since sysupgrade works with mtd devices the rootfs partition is already joined - we can use a bigger sysupgrade image than factory/TFTP install images Checked on hardware, no issues seen. No modifications to images other than sysupgrade (i.e. TFTP / recovery images not touched). Signed-off-by: Russell Morris <rmorris@rkmorris.us>

view details

push time in a month

pull request commentopenwrt/openwrt

ramips: sunvalley - allow larger sysupgrade

OK, let me do some more digging, sorry!

I checked here, but I may be missing what I need to change in the title. Thanks!

arrmo

comment created time in a month

pull request commentopenwrt/openwrt

ramips: sunvalley - allow larger sysupgrade

Updated - and thanks @bobafetthotmail! I blatently stole some of your text above 😆.

Yell if you see any other issues. Thanks again.

arrmo

comment created time in a month

push eventarrmo/openwrt

Russell Morris

commit sha 64161c6d6a592f652c1c9bd60982202024dab805

sunvalley - allow larger sysupgrade Aligned to size of mtd-concat partition (firmware) - in this device we have mtd-concat driver that joins multiple flash partitions - since sysupgrade works with mtd devices the rootfs partition is already joined - we can use a bigger sysupgrade image than factory/TFTP install images Checked on hardware, no issues seen. No modifications to images other than sysupgrade (i.e. TFTP / recovery images not touched). Signed-off-by: Russell Morris <rmorris@rkmorris.us>

view details

push time in a month

pull request commentopenwrt/openwrt

kirkwood: expand internal storage for EA3500/EA4500 & external for all

Hi,

I may be missing what you are after - but I found this because I was having the same issue (wanted to increase the kernel size ... trying testing kernel, but it was too large => build failed). I made just a couple minor changes,

  1. change the dts, as @bobafetthotmail seems to be saying. This is to shift as bit of the flash space from rootfs to kernel.
  2. with1) done, then change the makefile, to match the kernel size limit

The outcome is that I now am running v5.10 kernel on this router, with the partitions like this,

dev:    size   erasesize  name
mtd0: 00080000 00004000 "u-boot"
mtd1: 00004000 00004000 "u_env"
mtd2: 00004000 00004000 "s_env"
mtd3: 00300000 00004000 "kernel1"
mtd4: 01100000 00004000 "ubi"
mtd5: 00300000 00004000 "kernel2"
mtd6: 01100000 00004000 "rootfs2"
mtd7: 01600000 00004000 "syscfg"
mtd8: 00178000 00004000 "unused"

I may be missing the point, but is this what you are after?

@bobafetthotmail, do you also want to try this on your 4500? I can share my changes if you want. And yes, as you note above - I didn't lose dual partition (I like that too!).

Thanks!

PS; I don't think the info under the EA3500 is quite right - meaning this, 3. Repeat the top steps three times, and when the power light no longer turns off during boot up, the device should be reset to default firmware/ settings. => Rather, this sends you back to the "other" partition ... has saved my butt a few times 😆.

builker

comment created time in a month

push eventarrmo/openwrt

Adrian Schmutzler

commit sha 7f1b0f68f16c3f063322887ee10b0ae8f47603af

ramips: convert mtd-mac-address to nvmem for D-Link DIR-8xx Convert this series by moving the definitions to the individual devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Adrian Schmutzler

commit sha 9cb5853592c5f146fd82506168f53d8ada0639fa

ramips: fix indent in DTS for GL.iNet VIXMINI/microuter-N300 Use correct indent. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Adrian Schmutzler

commit sha f13c7a56f0352b001e9495fb64fc4e7cfa268d31

ramips: remove redundant nvmem definitions Due to use of a script when migrating from mtd-mac-address, a few of the definitions are redundant in DTSI and DTS files. Remove those. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Adrian Schmutzler

commit sha 41aa765946c55a91543cc872f595f5e3298dcf0a

ath79: remove redundant nvmem definitions Due to use of a script when migrating from mtd-mac-address, a few of the definitions are redundant in DTSI and DTS files. Remove those and consolidate the definitions in parent DTSI files in a few cases. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Adrian Schmutzler

commit sha 8a78d6129975bb6faf168c5b51c05186e9f90856

ramips: convert mtd-mac-address to nvmem for UniElec devices Convert this series by moving the definitions to the individual devices. Now all devices on ramips are converted. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Adrian Schmutzler

commit sha adb3e46616c69472964bfc0763ff622f468cb2ff

lantiq: convert mtd-mac-address to nvmem for Fritz!Box 736x Convert this series by moving the definitions to the individual devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Adrian Schmutzler

commit sha 05ccca031e1654d5cdff912dd7276cca40d37e44

mediatek: convert mtd-mac-address to nvmem for MT7629 RFB This conversion appears to have been overlooked since it's in a kernel patch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

view details

Stijn Tintel

commit sha 718a4f47806da8f68cb8f1fe2ebecf403e14ae96

wolfssl: fix build with GCC 10 on 32 x86 targets Backport upstream patch to fix build with GCC 10 on 32 x86 targets. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

view details

Hauke Mehrtens

commit sha a1034afba8ea8bec48e2528fdae0fb74a6757e53

uboot-at91: fix dtc compilation on host gcc 10 Backport a patch from upstream U-Boot to fix the compile with host GCC 10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

view details

Hauke Mehrtens

commit sha fcfeb47eb02faeca865ee8676776aa97e123fbda

at91bootstrap: Fix compile with binutils 2.36 This fixes a build problem seen after binutils 2.36 is used by default. Fixes: 3f41153b1c28 ("toolchain/binutils: switch to version 2.36.1 by default") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

view details

push time in a month

pull request commentopenwrt/openwrt

ramips: sunvalley - allow larger sysupgrade

Updated the naming (title above, and commit), reverted IMAGE_SIZE, only allow sysupgrade to be larger (and matched to firmware size, for mtd-concat partition).

Thanks!

arrmo

comment created time in a month

push eventarrmo/openwrt

Russell Morris

commit sha 60ac15d770f8dc28744217b5a97b1f3d8ee675f8

sunvalley - allow larger sysupgrade Aligned to size of mtd-concat partition (firmware) Checked on hardware, no issues seen. Signed-off-by: Russell Morris <rmorris@rkmorris.us>

view details

push time in a month

push eventarrmo/openwrt

Russell Morris

commit sha 1abd19844dbcad91af478181253fb7aad6ccd161

sunvalley - allow larger sysupgrade Aligned to size of mtd-concat partition (firmware) Checked on hardware, no issues seen. Signed-off-by: Russell Morris <rmorris@rkmorris.us>

view details

push time in a month

pull request commentopenwrt/openwrt

ramips: Update sunvalley dtsi - matching to partition information

Commit title needs to be updated.

Agreed! You OK with me updating it similar to the discussion that I think we just closed on (i.e. similar to "Ramips sunvalley, Permit Larger sysupgrade")?

Thanks!

arrmo

comment created time in a month

push eventarrmo/openwrt

Stijn Tintel

commit sha 8347d8b4fbe41ce7db386f948df3ebb6c6bc32d3

base-files: add generic sdcard upgrade method Add a generic sdcard upgrade method instead of duplicating code in yet another target, and add a feature flag to only install this upgrade method in targets that set this flag. Copied from mvebu. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

view details

Stijn Tintel

commit sha b1bff5cb57fab31932ceaa0dea9509effe9f5800

mvebu: switch to generic sdcard upgrade method Now that we have a generic sdcard upgrade method, which was copied from the mvebu platform method, we can switch mvebu to the generic method. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

view details

Daniel Golle

commit sha 80be893d2b3bf550ece5c15cf7ed967b31f7042d

procd: change procd_add_start_mount_trigger to do restart Change procd_add_start_mount_trigger to procd_add_restart_mount_trigger and make it call 'restart' instead of 'start'. This is more useful as it allows to handle both cases, intial start of a services as well as restarting services. Calling 'restart' on a service which has not yet been started has the same result as calling 'start'. Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Rui Salvaterra

commit sha 39d12b015540b7a7e344b169fcb91c3eb37e65c1

kernel: bump 5.10 to 5.10.55 No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

Rui Salvaterra

commit sha 33e84e70ef6d0dd81ce0533f0c0495f9acc86ca9

kernel: bump 5.10 to 5.10.56 No patches needed refreshing Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

John Audia

commit sha 3c0a26b43a2947d22cd907fde0e551273d56b121

kernel: bump 5.4 to 5.4.138 All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>

view details

Damien Mascord

commit sha 8e10b0181cf63f969705db6054ab0c16331069cf

kernel: backport mdio_find_bus from 5.10.x mdio-tools (https://github.com/wkz/mdio-tools) requires the use of mdio_find_bus, which is not present in 5.4.x. This patch backports the required change from 5.10.x to 5.4.x The original patch submission for this can be found at https://patchwork.ozlabs.org/project/netdev/patch/20200201074625.8698-2-jeremy.linton@arm.com/ Signed-off-by: Damien Mascord <tusker@tusker.org> [Add original patch description] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

view details

Rui Salvaterra

commit sha 968dc3329961918eb97b5eea3a9a00dade24c29c

kernel/generic: add CONFIG_KCSAN to the 5.10 kconfig Add the missing CONFIG_KCSAN (disabled). Found while making kernel_oldconfig on an x86-64 subtarget. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

Rui Salvaterra

commit sha 86c0c12c74597e4e4cb617788334a5755056f803

ath79: fix the AR7{1,2}00 USB PHY patches PHY_SIMPLE is a bogus kconfig symbol, what we really need to select is GENERIC_PHY. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

Klaus Kudielka

commit sha b3b855191b08baf88ecf0255839164ac1863726e

mvebu: backport Turris Omnia DTS changes to 5.10 Kernel 5.10 receives the complete set of improvements from 5.11/5.12. While we are at it, move the patches accepted upstream to the 0xx series. Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>

view details

Klaus Kudielka

commit sha f2c57a294f567c4cd9fa163091a1026fb0bd351b

mvebu: backport Turris Omnia DTS changes to 5.4 Kernel 5.4 receives a reduced set, just to make the SFP cage work. While we are at it, move the patches accepted upstream to the 0xx series. Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>

view details

Klaus Kudielka

commit sha 82620cd610807da73935832e3751771866faa7c9

mvebu: Turris Omnia: use SFP module, if present Follow the recommendations stated in the Turris Omnia DTS for eth2: "In case SFP module is present, U-Boot has to enable the sfp node above, remove phy-handle property, and add managed = "in-band-status" property." The boot script is written in a way, that it works for all U-Boot versions deployed by the vendor so far (2015.10-rc2, 2019.07). Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>

view details

Josef Schlehofer

commit sha 7b868fe04a8961048feec1143e72fe47bde52a12

Revert "mvebu: 5.4 fix DVFS caused random boot crashes" Based on the discussion on the mailing list [1], the patch which was reverted, it reverts only one patch without the subsequent ones. This leads to the SoC scaling issue not using a CPU parent clock, but it uses DDR clock. This is done for all variants, and it's wrong because commits (hacks) that were using the DDR clock are no longer in the mainline kernel. If someone has stability issues on 1.2 GHz, it should not affect all routers (1 GHz, 800 MHz) and it should be rather consulted with guys, who are trying to improve the situation in the kernel and not making the situation worse. There are two solutions in cases of instability: a) disable cpufreq b) underclock it up to 1 GHz This reverts commit 080a0b74e39d159eecf69c468debec42f28bf4d8. [1] https://lists.openwrt.org/pipermail/openwrt-devel/2021-June/035702.html CC: Pali Rohár <pali@kernel.org> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

view details

Josef Schlehofer

commit sha d3794768177293f584cc74f90c921276793da1e7

mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz This patch is backported from linux-arm-kernel [1] to improve situation, when it was reported that 1.2 GHz variant is unstable with DFS. It waits to be accepted upstream, however, it waits for Marvell people to respond. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210630225601.6372-1-kabel@kernel.org/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

view details

Linus Walleij

commit sha 83441522a2389fd44630df3368c3eecf3cb2579f

gemini: Add hdparm setting This uses "hdparm" (if present) to get the harddisk into low power mode on NAS set-ups. Cc: Adrian Schmutzler <mail@adrianschmutzler.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

view details

Martin Schiller

commit sha 6c659fb80c6bb101d51b66e9631e8ec8116ecc9c

layerscape: armv8_64b: do not disable CONFIG_IP_ADVANCED_ROUTER This option is needed e.g. to use strongswan for IPSec. BTW: This was the only target where this option was disabled. Signed-off-by: Martin Schiller <ms@dev.tdt.de>

view details

Rui Salvaterra

commit sha 0af0ec1b7df8740c7a4b9264f032cfd6dd87d144

toolchain/gcc: bump gcc 11 to 11.2 Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

Jianhui Zhao

commit sha 9df7eadcfd3129cecfb30ec78a43ae9b3175869e

iw: enable print wpa ie for scan This increases the size of the iw_5.9-8fab0c9e-3_mips_24kc.ipk from 41166 to 41942 bytes by 776 bytes. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>

view details

Ansuel Smith

commit sha 97d88b1fbd62ad8a24b076d317c7408ee7012757

iproute2: bump to 5.13 Drop patch 185-libbpf-add-limits-h merged upstream Update patch 170-ip_tiny Update patch 130-no_netem_tpic_dcb... Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

view details

Daniel Kestrel

commit sha 12564c5b860f9849c9a2fb7026c2c11150b9a4fc

fritz-tools: fix returning wrong values due to strncmp usage When having two keys that start with the same characters and the second key just has one character more nand_tffs_read and tffs_read return the wrong value for the longer key. This is due to the usage of strncmp in combination with the length of the shorter key which is usually first in the list before the longer key and when strncmp matches, the search is stopped. The problem only occurs when the length of the two keys is different, not if just the last character is different. The fix is to use strcmp and as such it will only return the value if the key (name) and the key to look for (namefilter) have the same value and length. A sample case returning wrong values is when keys macwlan and macwlan2 are defined and querying macwlan2 returns the value for macwlan. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>

view details

push time in a month

issue commentinfluxdata/telegraf

Wireguard input plugin can't find device

Works here as well, thanks!

Projekt95

comment created time in a month

issue commentinfluxdata/telegraf

Wireguard input plugin can't find device

Unfortunately not - it's still not working for me 😞

Projekt95

comment created time in a month

push eventarrmo/openwrt

David Bauer

commit sha a57d7c29a40ae5b691deafcc267652b918159bc0

generic: fix build warning Fixes a unused variable warning: drivers/of/of_net.c: In function 'of_get_mac_address_mtd': drivers/of/of_net.c:92:19: warning: unused variable 'prop' [-Wunused-variable] Signed-off-by: David Bauer <mail@david-bauer.net>

view details

Rui Salvaterra

commit sha f2961c9c2be6873536fc68bed4bf2da6f3746c98

kernel: bump 5.10 to 5.10.53 No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

Rui Salvaterra

commit sha a20e6149b3aceaf9c5ded756ec6665d3866f640e

kernel: bump 5.10 to 5.10.54 Deleted (upstreamed) patches: mediatek/patches-5.10/000-spi-fix-fifo.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

view details

Daniel Golle

commit sha 3404af774d3362ba29487fbb26103e4a6bce7676

fstools: update to git HEAD b7bf185 blockd: make most calls to 'block' asynchronous Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Rafał Miłecki

commit sha 7c4d79aa1c3595e2be36d1449cf63404f301f748

otrx: use firmware-utils.git to avoid code duplication Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

view details

David Bauer

commit sha f038a169a0341f4212997f02de2b280ea1178f9e

generic: add missing Kconfig symbol Fixes build errors for sunxi as well as rockchip targets. Signed-off-by: David Bauer <mail@david-bauer.net>

view details

John Audia

commit sha 28ef76402671c4166de2d34e52dbc4f46dc08077

kernel: bump 5.4 to 5.4.135 All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>

view details

John Audia

commit sha bd3cb93034ef266190a1a8885d131c85956f6ee2

kernel: bump 5.4 to 5.4.136 All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>

view details

John Audia

commit sha 9993e3e3e6ceadb9bb5dfaf6b8de5d94f159a8ac

kernel: bump 5.4 to 5.4.137 Automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>

view details

Hans Dedecker

commit sha e02a4c20809713922e2c52ac190e883b7a5dfe18

odhcp6c: update to latest git HEAD 94adc8b odhcp6c: use strpbrk to provide get_sep_pos e0d9a4b cmake: enable extra compiler checks Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

view details

David Bauer

commit sha 191c4ff5e1d045c6a4f9086acfa77e6e14e1f17c

generic: add missing ARM64 crypto Kconfig symbols bcm27xx-bcm2710 builds are stalling when compiled with V=s. Explitily disable these unset symbols to avoid stalling builds. Signed-off-by: David Bauer <mail@david-bauer.net>

view details

Daniel Golle

commit sha 59c63224e11d6c4eca27131a73bf16218e47a271

dnsmasq: rework jail mounts * split into multiple lines to improve readability * use EXTRA_MOUNT for addnhosts instead of blindly adding /tmp/hosts * remove no longer needed mount for /sbin/hotplug-call * add dhcp-script.sh dependencies (jshn, ubus) Fixes: 3a94c2ca5c ("dnsmasq: add /tmp/hosts/ to jail_mount") Fixes: aed95c4cb8 ("dnsmasq: switch to ubus-based hotplug call") Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Daniel Golle

commit sha ac4e8aa2f8d98158ea7b749f877269f1f5fa9c5a

dnsmasq: fix more dnsmasq jail issues * remove superflus mounts of /dev/null and /dev/urandom * reset EXTRA_MOUNTS at the beginning of the script * add mount according to ignore_hosts_dir * don't add mount for file which is inside a directory already in the EXTRA_MOUNTS list Fixes: 59c63224e1 ("dnsmasq: rework jail mounts") Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Daniel Golle

commit sha ddc8d085f39dea998f59680fb556ca72d779a3b1

dnsmasq: reset EXTRA_MOUNT in the right place EXTRA_MOUNT variable should be reset in dnsmasq_start() rather than just once at the beginning of the script. Fixes: ac4e8aa2f8 ("dnsmasq: fix more dnsmasq jail issues") Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Hans Dedecker

commit sha 022d1fe80f0bda01cbda62f29ee6f58b8dc0ae37

nat46: fix translation of ICMP protocols parameter problem and unreachable 9b3a819 nat46-core: Fix translation of ICMP protocols parameter problem and unreachable (#27) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

view details

Daniel Golle

commit sha af76e26b557270307e05be168c3b9463886306f1

base-files: sysupgrade stage2: fix losetup detection If the busybox applet losetup was selected, `command -v` selects that during sysupgrade. As this applet is in another path and doesn't cover the '-D' option which is used to make sure user-defined loop devices are no longer active during sysupgrade. Detect losetup at the path of the full utility to avoid error messages in case of the busybox applet being selected. Reported-by: fda77 <fda77@users.noreply.github.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Daniel Golle

commit sha 4baf47b9a828b2e2ba2f174083676fe79b0ab527

images: squashfs: xattrs should not depend on buld host Enable xattr for the generated squashfs only if needed for SELinux. This eliminates warnings during boot on target when building (non-SELinux) OpenWrt on SELinux-enabled hosts like Fedora. Reported-by: fda77 <fda77@users.noreply.github.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Daniel Golle

commit sha 0f5e8c86142a595b00284adb00797b84d4710d87

ubox: update to git HEAD 1f4f72b logd: fix privilege dropping order 205defb logread: fix erroneous message "Logread connected to" with udp Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Daniel Golle

commit sha 080a2d4bdf51e227c7184cc118722da128ac5dc5

fstools: update to git HEAD 141ac85 libblkid-tiny: fix invalid open syscall return check 9e26563 libblkid-tiny: install header file to include dir Signed-off-by: Daniel Golle <daniel@makrotopia.org>

view details

Rafał Miłecki

commit sha b37f0dde78656a352914c4d01010979530589103

kernel: fix kernel 5.5 and 5.9 PCI DT regressions This fixes PCI on bcm53xx. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

view details

push time in a month

pull request commentopenwrt/openwrt

ramips: Update sunvalley dtsi - matching to partition information

And the second post, about this Device (recipe). Thanks!

arrmo

comment created time in a month

pull request commentopenwrt/openwrt

ramips: Update sunvalley dtsi - matching to partition information

OK, here is my post about image size. Will also create one for debugging the Makefile (but let me fiddle with that a bit first 😆).

Thanks!

arrmo

comment created time in a month

pull request commentopenwrt/openwrt

ramips: Update sunvalley dtsi - matching to partition information

Let me open a side discussion to debug the image size - seeing some real odd items there. Thinking something isn't right, or at least consistent => but it's what started this PR / debugging. We can work it out there, then come back here 😄.

Thanks!

arrmo

comment created time in a month

pull request commentopenwrt/openwrt

ramips: Update sunvalley dtsi - matching to partition information

Now you understand what I wrote in my previous comments?

Yes, thanks for the details - appreciated! I was slow to reply, as I was trying to step through, see why the image size was blowing up so much. So I started from scratch, added my packages ... here is what I found, image

I have no idea what kmod-crypto-kpp is, but it's absolutely blowing up the image size. I didn't select it, but it seems to be around. What's odd - now I can't seem to get rid of it. If I add all the items before it in the list, it's there automatically! But, if I add them one by one ... nope. What?!?!

I even tried a make clean - no joy. Make dirclean - still not. Can't seem to get rid of it now. Thinking it's WireGuard related, but it's not there stepping through one by one?

Pulling my hair out! 😆

arrmo

comment created time in a month

push eventarrmo/nodejs-poolController

Russell Goldin

commit sha 709dbddc768ef5c4344ec1e93efff19b7b8a502d

refactor cancelDelay; bump to 6.1.1

view details

Russell Goldin

commit sha c22ab73b6f286e00d857ebe09538b66c3b5cf346

mqtt fixes and state/time emit

view details

Robert Strouse

commit sha 1f10da6ae865f2bc56df227ea897f10baff4a821

Added dual system temperature probe for waterSensor2.

view details

Robert Strouse

commit sha 7bd4e6811460e115edd9a2b87ef7222e362c9132

Added on/off/ignore support for IntelliCenter circuitGroups Fixed issues create by the release of 1.047 IntelliCenter firmware. Added processing for all 4 water and solar sensors.

view details

Russell Goldin

commit sha 664ec136e013c6ffb5bf933998819458b4c33f60

add mqtt virtualcircuit bindings

view details

Russell Goldin

commit sha 51153332a62bc5ff34e76f2d80219119b49a919f

#219 PL4 identification

view details

Robert Strouse

commit sha 18ec2bc88d364bad0e17a1f0bc89a224c3c791c9

Fixed byte alignment with 168 message

view details

Robert Strouse

commit sha 71ba5c23c5ccdcd4787cb1294eb04c447091182d

Added showInFeatures to circuit groups to hide them in web interfaces. This option does not currently exist in the Pentair interfaces but it probably should.

view details

Robert Strouse

commit sha 3e3c3aedf67230958dcbb64055b5629350242d57

Fixed don't stop flags on all circuit types.

view details

Michael Smith

commit sha e4935a94fa12bf4ce122fd87709c1dae5da10ca1

Manually adding @andylippitt docker changes

view details

Michael Smith

commit sha c47ca45215fae6b962c8e77503594929fe83cebc

smaller images and run as non-root use node:alpine base image .dockerignore not needed with mutistage build

view details

Michael Smith

commit sha 3146763a889ba10136e0a5c59a0d5a5c3f312a58

Do not use vercel/ncc also move source-map-support from devDependencies to dependencies, as we don’t want it removed by npm prune --production

view details

Michael Smith

commit sha 3618c6d40317d6ecea79d37c35159c14c7203436

remove npm build-prod which was for ncc

view details

Robert Strouse

commit sha 95fe5a2a301f7a1f38c6d7e33900db6448b7a3c7

Fixed issue where the solarSensor2 was pointing to solarSensor1 when more than one controllable body is assigned to the equipment.

view details

Robert Strouse

commit sha e00168ad00d06a0cea8698112629e2e1bbb64d50

Added functions to support heater cooldown delays on gas heaters. Added ack checking for options messages.

view details

Robert Strouse

commit sha 1dc5aaa3e95d86a69996b226bb68ac778dbe8d86

Added defaults to IntelliCenter schedule types.

view details

Robert Strouse

commit sha a1a790c30854e021ee7339847df323210cfc2805

Added parens for byte translation.

view details

Russell Goldin

commit sha 4e1ed8804be4127db6350ac7d5f2dc72f928bba1

#215; schedule config updates

view details

Robert Strouse

commit sha 7a49ba507b62d3877f56eff41b8912b9dce32510

Organized the IntelliCenter temp sensors based upon the correct locations for waterSensor2 and solarSensor2

view details

Robert Strouse

commit sha a2e7f5d874b25cf0cc5b33e5a1a168abe352dbcd

Changed mult-message configuration to serialize all messages and wait for responses from all panels.

view details

push time in a month

issue closedtagyoureit/nodejs-poolController

influx Write Failing (Influx v1.8.6)

Describe the bug As discussed in gitter.im, no output to influx database it seems.

To Reproduce Start up njsPC, check traffic to influx, and as well data inside influx => confirm no data points written.

Expected behavior Data stored to influx.

Screenshots N/A

Packet Capture Replay attached! replay.zip

closed time in a month

arrmo

issue commenttagyoureit/nodejs-poolController

influx Write Failing (Influx v1.8.6)

For the npm -i run it again. This time use sudo npm -i and see if it completes pulling down the socket binaries. Perhaps there were more errors to include the serial port as well. Either way it must complete without error.

That was it, thanks! sudo was the trick - I admit, didn't think it was needed, but I was wrong. Thanks for the suggestion, back up and running. Appreciate it!

arrmo

comment created time in a month

issue commenttagyoureit/nodejs-poolController

influx Write Failing (Influx v1.8.6)

I am very confused by this output. There are no RS485 messages or any socket responses. Did you run npm -i after you did git pull?

Yep, I did! I just checked, and if I refresh dashPanel it does show inforamtion in the log (e.g. GET /state/all?null {}) ... but dashPanel is not updating. I mentioned to @tagyoureit, dashPanel seems to be stuck "Initializing"?

. I did see some sort of socket.io error when I ran npm -i ... but sadly, we had a power outage since then, and I lost that message 😞.

We upgraded the socket io and serial adapter a couple of months ago. Perhaps both of these interfaces are not connecting for output. I do see that it opened the serial port but I don't see any traffic whatsoever.

OK, thought I was just missing the point (as I was expecting a lot more output). Hmmm. Let me try a hard power cycle here, see if that helps any. I haven't really changed anything in quite a while.

EDIT: Just for shucks change your influxDB section to the following. Remove the quotes around the port number.

Tried - no joy.

arrmo

comment created time in a month

issue openedtagyoureit/nodejs-poolController

influx Write Failing (Influx v1.8.6)

Describe the bug As discussed in gitter.im, no output to influx database it seems.

To Reproduce Start up njsPC, check traffic to influx, and as well data inside influx => confirm no data points written.

Expected behavior Data stored to influx.

Screenshots N/A

Packet Capture Replay attached! replay.zip

created time in a month

pull request commentopenwrt/openwrt

ramips: Update sunvalley dtsi - matching to partition information

Just to note: you don't have to stick to IMAGE_SIZE. You could use arbitrary numbers after check-size in the recipe.

I like that, good idea!

So I don't see why are you interested in 2 different values, instead thinking about a method which safely creates a kernel.bin and rootfs.bin from an "oversized" (6144 k <= x <= 7680k) $$(sysupgrade_bin).

Sounds good ... I think 😜. You lost me there, not quite sure what you're after. Can you clarify a bit? Thanks!

arrmo

comment created time in a month